PPG - Vikote 56  is a modified acrylic finish coat for above-water areas. Featuring good gloss and colour retention, resistance to water and splash of mild chemicals. This fast-drying coat can be applied at temperatures down to –10°C (14°F).

Features

• Finish coat for above-water areas
• Good gloss and color retention
  
• Resistant to water and splash of mild chemicals
  
• Fast-drying
• Can be applied at low temperatures, down to –10°C (14°F)
  

Recommended Substrate Conditions and Temperatures

Substrate conditions

• Previous coat (chlorinated rubber, vinyl or acrylic coatings) must be dry and free from any contamination

Substrate temperature and application conditions

•  Substrate temperature during application should be at least 3°C (5°F) above dew poin

Instructions For Use

• Stir well before useThe temperature of the paint should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity
  
• Adding too much thinner results in reduced sag resistance
  
• Adequate ventilation must be maintained during application and curing (please refer to INFORMATION SHEETS 1433 and 1434)

Air spray

Recommended thinner

THINNER 21-06

Volume of thinner

5 - 10%, depending on required thickness and application conditions

Nozzle orifice

1.8 – 2.0 mm (approx. 0.070 – 0.079 in)

Nozzle pressure

0.2 - 0.3 MPa (approx. 2 - 3 bar; 29 - 44 p.s.i.)

Airless spray

Recommended thinner

THINNER 21-06

Volume of thinner

0 - 5%, depending on required thickness and application conditions

Nozzle orifice

Approx. 0.28 – 0.33 mm (0.011 – 0.013 in)

Nozzle pressure

12.0 - 15.0 MPa (approx. 120 - 150 bar; 1741 - 2176 p.s.i.)

Brush/roller

Recommended thinner

THINNER 21-06

Volume of thinner

0 – 3%

Cleaning solvent

THINNER 21-06